Short description
Quick Overview
- For Content Creation, Mobile Journalism
- For 2-Person Shoots with Sony Cameras
- 2 x Transmitters with Built-In Mics
- Dual-Channel Receiver with MI Shoe
- 492' Transmission via Bluetooth 5.3
- 3.5mm TRS and USB-C Ports
- Noise Cancellation, Low-Cut Filter
- Attenuator Function, LED Indicators
- Charging Case, 6-Hour Battery Life
Product Description
Record two-subject interviews and vlogs with your Multi Interface compatible Sony camera using the Sony ECM-W3 2-Person Wireless Microphone System. This system includes two clip-on transmitters with built-in microphones and a dual-channel receiver that connects via the Multi Interface Shoe. It supports recording both analog and digital audio signals, allowing for mixed or separate channels to offer ultimate postproduction flexibility. The ultracompact receiver features integrated 3.5mm TRS and USB-C output ports. Two switches on the side enable you to select separate or mixed channel recording and toggle between analog and digital output modes. Additionally, you can activate safety track recording to guard against unforeseen interruptions. The transmitter units come with an attenuator switch to prevent clipping.
Bluetooth Wireless Communication
The units communicate with one another via Bluetooth 5.3 low-energy LC3plus codec from up to 492' away. The Bluetooth LC3plus codec ensures low power consumption and low latency while maintaining high sound quality.
Multi Interface Shoe
Use the receiver's integrated Multi Interface Shoe for cable-free connection to your compatible Sony camera. The camera body can supply power to the receiver when attached. Audio is transmitted via direct digital signal for high-quality sound free of transmission deterioration.
Digital Sound Recording
Digital MEMS microphones with a high signal to noise ratio are integrated into each transmitter to capture clear audio with low noise. You can eliminate distortion even further using the built-in noise cut and low-cut filters. The noise cut filter uses digital signal processing to remove interference, while the low-cut filter reduces unwanted low-frequency noise such as wind, air conditioning units, and vibrations.
Clip-On Transmitter
- Filters: Equipped with noise cut and low-cut filters.
- Attenuation Settings: Choose from 0, 10, or 20 dB.
- External Microphone Input: Features a 3.5mm TRS jack for external microphones.
Battery Life
- Integrated Lithium-Ion Batteries: Each component includes a built-in lithium-ion battery.
- Long Operation Time: Transmitters can run for six hours on a full charge.
- Portable Charging: Recharge components on the go using the included charging case.
Component Design
- LED Indicators: Receiver and transmitters have LED indicators to show communication status and battery levels.
- Durability: All components are designed to be moisture and dust-resistant for outdoor use.
- Noise Reduction: Furry windscreens are included to minimize wind noise.
| MFG Part# | ECM-W3 |
|---|---|
| Condition | New |
×
Request Assistance
Unfortunately, our supplier cannot provide an accurate timeframe so we have suspended backorders for this item. Reach out to our Experts (available via Live Chat or Phone) to find an alternative solution tailored to your needs.
Contact Us
×